How to Find Our Products
The Weather-Tec sprinkler or unit numbers are composed of a prefix number, followed by a dash and a suffix number. The prefix number identifies the basic type of equipment. The suffix number identifies the unit.
Basic Unit Numbers
Prefix No. Series
Unit Type Description
Examples
50-
Impact Lever Type, One Piece Stainless Steel Tube
G50-7, G50-11, G50-15, & G50-23
10-
Impact Lever Type – Full Circle
10-02, 10-03, 10-10, 10-20, 10-30,
10-67, 10-80
15-
Impact Lever Type – Part Circle
15-20, 15-30, 15-67, 15-80
65-
Spindle Extractor
65-20, 65-30, 65-60, 65-80
Model Variation Letters
To be added at end of the model number
- A = Adjustable Nozzle with Stream Break-Up Screw
- B = Baffle Nozzle with Adjustable Distance-Control Baffle
- D = Dual Nozzle
- F = Female
- FC = Flow Control Nozzle
- G = Standard Brass Bearing
- J = With Bellow
- K = Sealed Bearing without Spring Cover
- L = Low Angle
- LC = Locking Collars
- MP = Multi-Pressure Nozzle
- P = Plastic Bearing
- S = 3/8 24th Nozzle
- T = Teflon Washers
- V = Wedge Lever
- 3/4 = To show 3/4″ Male Base on a sprinkler that normally has a 1/2″ Male Base
Test Procedure for Performance Tables
All sprinklers were tested under minimum wind conditions. The water pressure readings were taken below the sprinkler inlet to provide meaningful design data. All pressure readings recorded are accurate to within 2% of actual pressure. The recorded flow rate (in U.S. gallons per minute) is accurate to within 1% of actual flow. Diameters are rounded to the nearest foot. The information on our website is the average of the performance of a number of inventory samples.