10-30 LD

a U.S.A. Corporation

Ag Product Information

Model 10-30LD

Full circle impact - 15° trajectory

3/4" male N.P.T. - dual nozzle

Cast-bronze head with cored water passage and double-bridge construction

Cast-bronze lever with I-beam construction for added strength

Wide impact area increases lever life

Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability

T-ring style bearing for proven dependability

Designed for pivot or linear systems

Exceptional where wind conditions cause excessive drift

MODEL 10-30LD 15° Single Nozzle Standard Nozzle Performance Nominal stream height 4' above nozzle @ *normal pressure
	Nozzle		Nozzle		**Nozzle		Nozzle		Nozzle		Nozzle		Nozzle		Nozzle
PSI	9/64"		5/32"		11/64"		3/16"		13/64"		7/32"		15/64"		1/4"
	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM
35	77	3.39	78	4.15	79	5.03	80	6.00	81	7.19	82	8.42	83	9.36	84	10.69
40	78	3.62	79	4.44	80	5.37	81	6.41	82	7.63	83	8.91	84	9.99	85	11.42
45	79	3.84	80	4.72	81	5.70	82	6.80	83	8.05	84	9.37	85	10.58	86	12.10
50	80	4.04	81	4.98	82	6.00	83	7.16	84	8.44	85	9.80	86	11.13	87	12.75
55	81	4.23	82	5.23	83	6.29	84	7.51	85	8.81	86	10.21	87	11.66	88	13.36
60	82	4.42	83	5.46	84	6.56	85	7.84	86	9.17	87	10.60	88	12.17	89	13.94
65	83	4.60	84	5.69	85	6.83	86	8.16	87	9.50	88	10.97	89	12.65	90	14.50
70	84	4.77	85	5.91	86	7.08	87	8.47	88	9.83	89	11.32	90	13.11	91	15.04
75	85	4.93	86	6.12	87	7.33	88	8.76	89	10.14	90	11.66	91	13.56	92	15.56
80	86	5.09	87	6.33	88	7.56	89	9.05	90	10.44	91	11.99	92	13.99	93	16.06

MODEL 10-30LD 15° Dual Nozzle Standard Nozzle Performance Nominal stream height 4' above nozzle @ *normal pressure
	Nozzle		Nozzle		Nozzle		Nozzle		Nozzle		Nozzle		Nozzle		Nozzle
PSI	9/64x3/32" 7°		5/32x3/32" 7°		11/64x3/32" 7°		3/16x1/8" 20°		13/64x1/8" 20°		7/32x1/8" 20°		15/64x1/8" 20°		1/4x1/8" 20°
	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM	Dia.	GPM
35	77	4.86	78	5.72	79	6.59	80	9.00	81	10.08	82	11.24	83	12.64	84	13.59
40	78	5.19	79	6.11	80	7.03	81	9.58	82	10.75	83	11.96	84	13.45	85	14.52
45	79	5.50	80	6.48	81	7.45	82	10.12	83	11.37	84	12.63	85	14.20	86	15.39
50	80	5.79	81	6.83	82	7.84	83	10.63	84	11.95	85	13.27	86	14.91	87	16.21
55	81	6.07	82	7.16	83	8.22	84	11.12	85	12.51	86	13.87	87	15.58	88	16.99
60	82	6.34	83	7.48	84	8.57	85	11.58	86	13.03	87	13.33	88	16.22	89	17.74
65	83	6.60	84	7.78	85	8.91	86	12.02	87	13.54	88	14.99	89	16.83	90	18.36
70	84	6.84	85	8.07	86	9.24	87	12.44	88	14.03	89	15.51	90	17.42	91	19.15
75	85	7.08	86	8.35	87	9.56	88	12.85	89	14.50	90	16.02	92	17.99	92	19.81
80	86	7.31	87	8.62	88	9.87	89	13.24	90	14.95	91	16.51	92	18.53	93	20.45

* Standard nozzle at mid-point of pressure range
**Indicates standard nozzle size furnished unless otherwise specified
Optimum performance at mid-point of pressure range

WeatherTec Corporation - toll-free 800.835.7836
tel 559.291.5555 - fax 559.294.8802
info@weathertec.com